Accessories
RI9000 – Remote indicator
The remote indicator is designed to duplicate the fire alarm signal from a fire detector as well as to duplicate indications from executive devices and signaling.
Supply voltage: 9-28 V DC
Current in alarm: 40 mA / 24V DC
Indicator color: Red
Type of connecting line: Two-wire
Sequential resistor: 560Ω / 0.6W
Dimensions: (75x75x22) mm
Mass: 0.04 kg
M9000 – 2/4/6/8 Relay expansion module for FP9000
- INTRODUCTION
The module M9000R expands the outputs of fire control panels FP9000 and FP9000L. It is manufactured in 4 variants corresponding to the nomenclature of the produced fire control panels and specific requirements, depending on the specific project. The modules are in variants 2, 4, 6 or 8 relay outputs.
- TECHNICAL DATA
- Relay outputs for Fire condition type potential free, switching,3A/125VAC; 3A/30VDC
- Operational te, mperature range minus 15ºС to70ºС
- Relative humidity resistance (93 ± 3)% at40ºС
- Dimensions (95х90×22)mm
- Weight 0.075g
M9000 – RS485 Interface module for communication of panels FP9000
- INTRODUCTION
Interface Module M9000-485 is designed for implementing the communication function between fire control panels and a personal computer or between fire control panels and repeaters, connected into a network. The module is installed in Fire Control Panels FP9000 4/8 and FP9000L 2/4/6/8.
- TECHNICAL DATA
- Power supply 5 ( ± 0.1) V DC /of panel/
- Consumption 12 mА/ 24V DC
- Data exchange speed fixed 9600 bits/s
- Connection to interface RS485 two-wire line
- Operational te, mperature range minus 15ºС to70ºС
- Relative humidity resistance (93 ± 3)% at40ºС
- Dimensions (112х22×22)mm
- Weight 50g
M9000-EXT Extender with 4 relay outputs for aerosol extinguishing
FUNCTIONAL CHARACTERISTICS:
It is mounted to the Fire Extinguishing Plant and serves for the control of AEROSOL GASES with 4 controllable relay outputs (24VDC / 3A – 0.1 sec), which are connected in series. This allows all actuators of the aerosol device to have the required full energy at the moment of switching on. The module prevents a voltage and current fall with simultaneous actuation of several actuators, which may compromise the activation, considering the HIGH pulse power consumption at the moment of actuation.
M9000 – 12V Converter module 24V-> 12V
FUNCTIONAL CHARACTERISTICS:
It is used to power devices that require 12V power, such as communicators, dialers, etc., working with FP9000 and FP9000L – x panels.
Supply voltage: 16-30 V DC
Output voltage: 12 V DC / 100mA
It is installed in FP9000 and FP9000L – x plants
Dimensions: (55x75x22) mm
Mass: 0.04 kg
Adapter from USB to RS485
B9000F-W / Deep Base-White
- Deep base accessorе
- Application for mounting on rough surfaces, pipelines, floating ceilings.
- Compatible with D9000x detectors and S9000 sounders.
- Weight ≤ 45g
- Dimensions ф 98mm / h – 35mm
- Collor White
