Conventional Manual Call Point
D9000 MCP / Manual call point
The D9000 MCP manual call point is designed for indoor operation in fire detection systems and meets the requirements of European Standard EN54-11;
The fire detector is designed for easy installation and maintenance. There are built-in channels in the base for inserting cables in three directions – left, right, and top. The key to open the fire detector and restore the removed element is the same and is attached to the base.
D9000 The MCP has a protective transparent cover and a possibility of mounting a seal. Upon activation, except the graphic indication of the operating element, for visibility from a distance is activated and red LED.
- Supply voltage: (9-30) V / DC
- Resistance: 500Ω / (1 kΩ in broken PCB bridge)
- Current at 24V, 46mA / (22mAin broken PCB bridge)
- LED indicator: Red
- Protective cover: transparent
- Cross section of connecting cables: 0,4÷1,5 mm2
- Operating temperature range: minus 10ºС ÷ 50ºС
- Humidity: (93 ± 3)% at40ºС
- Degree of protection: IP 40
- Dimensions: (90 х 90 х 44) mm
- Weight: 0,120 kg
- Material: ABS plastic
Breakable seals
Seals for all D9000 MCP-x manual fire detectors and push buttons. Easy insertion and trouble-free elimination in a fire situation. 50 pcs.
B9000MCP-D / Deep base for Manual call points
Installation kit B9000MCP-D is used in installations that require the cables to be laid through lugs or pipes. Supplied with D9000 MCP manual button.
B9000MCP-S / Surface mounting base for Manual call points
B9000MCP-S Mounting Kit is used in installations that have built-in enclosures and low height hand button requirements. The D9000 MCP hand button is supplied.